DISTRIBUTION PANEL
DTNVE 1/6/0,5
FEATURES
Rated load current:IL0,5 A
Nominal voltage :UN 6 V
Lightning impulse current (10/350):Iimp5 kA
Response time tA< 30 ns
DTNVE 1/24/0,5
FEATURES
Rated load current:IL0,5 A
Nominal voltage :UN 24 V
Lightning impulse current (10/350):Iimp5 kA
Response time tA< 30 ns
P-K16/24 DC
FEATURES
Nominal voltage :Un24 V
Rated load current:IL16 A
Response time tA< 25 ns (L+/L-) < 100 ns (L/PE)
Back-up fuse :16 A LPZ 2-3
S2-400P MICROPROCESS DIGITAL METER
FEATURES
4 digits LED display: 9999
Accuracy : ±0.05% to ±0.25%
Measuring adjustment in input sensing deviation
S2-412PA MICROPROCESS DIGITAL METER RELAY
FEATURES
4 1/2 digits LED display: ±1999
Accuracy : ±0.05% to ±0.25%
Auto-zero and hold function
Measuring adjustment in input sensing deviation
S2-300A 3 DIGITAL METER RELAY
FEATURES
3 digits LED display: ±999
Accuracy : ±0.1% to ±0.25%
Auto-zero and hold function
S2-400A 4 DIGITAL METER RELAY
FEATURES
4 digits LED display: ±9999
Accuracy : ±0.05% to ±0.15%
Auto-zero and hold function
S2-400F 4 DIGITAL FREQUENCY METER
FEATURES
4 digits LED display: 9999
Accuracy : ±0.05%
Easy-to-wire. screw-type terminals
S2-800WH/S2-800RH MICROPROCESS WATT(VAR) HOUR METER
FEATURES
8 digits display: 99999999
Accuracy: ±0.3%
Programmable adjustment for current, voltage transformers ratio
Precision measurement even for unbalance system
S2-800WHT/S2-800RHT MICROPROCESS WATT(VAR) HOUR METER
FEATURES
8 digits display: 99999999
Accuracy: ±0.3%
Programmable adjustment for current, voltage transformers ratio
Precision measurement even for unbalance system
Provide a variety of output
S2-800MT MICROPROCESS AC POWER METER
FEATURES
8 digits display: 99999999(WH)
4 digits display: 9999(V,A,W)
Accuracy: ±0.3% F.S. ±1 digit , PF≧0.5
Programmable adjustment for current, voltage transformers ratio
Precision measurement even for unbalance system
S3-AD AC CURRENT TRANSDUCER
FEATURES
Accuracy: ± 0.2% R.O.
Excellent long term stability (4 ~ 20mA, 500Ω)
High impulse & surge protection (5KV)
S3-VD AC VOLTAGE TRANSDUCER
FEATURES
Accuracy: ± 0.2% R.O.
Excellent long term stability (4 ~ 20mA, 500Ω)
High impulse & surge protection (5KV)
S3-WD ACTIVE POWER (WATT) TRANSDUCER
FEATURES
Accuracy: ± 0.2% R.O.
Measuring reverse watt is available
Precision measurement even for unbalance system
And distorted wave.
High impulse & surge protection (5KV)
S3-WHD WATTHOUR TRANSDUCER
FEATURES
Accuracy: ± 0.2% R.O.
Measuring reverse watt is available
Precision measurement even for unbalance system
And distorted wave.
High impulse & surge protection (5KV)
S3-FD FREQUENCY TRANSDUCER
FEATURES
Accuracy: ± 0.025% R.O.
Self powered
Excellent long term stability (4 ~ 20mA, 500Ω)
High impulse & surge protection (5KV)
S3-DT FOUR OUTPUT DC SIGNAL TRANSMITTER
FEATURES
Steady voltage, current and low ripple output.
Three/Four isolated output.
Isolation: Input to output to power.
S4T-DT SIGNAL ISOLATED TRANSMITTER
FEATURES
Converting a DC input into a standard process signal.
Wide input and output range selection.
Isolation: Input to output to power.
S3-12(24)CM Multi-Circuit Power Meter
Features
Flexible monitoring the power energy in 8(4) three-phase or 24(12) single-phase circuits.
Compatible with various high precision TSC current sensors.
Power quality & power energy (kWh, kVAh, kVARh) measurements.
RS485 Modbus RTU communication interface.
Quick installation on a DIN 46277 35mm rail.
S4T-2DT TWO-WIRE ISOLATED TRANSMITTER
FEATURES
Power supply for tow wire output :DC 11~32V
Converting a DC input into a standard process signal.
Isolation: Input to output
S4T-DS LOOP POWERED ISOLATOR
FEATURES
DC 4-20mA/DC 4-20mA, self powered.
Isolation: Input to output, between channels.
S4T-DTD SIGNAL ISOLATED TRANSMITTER (TWO OUTPUT)
FEATURES
Converting a DC input into a standard process signal.
Two isolated output.
4 way isolated.
S4T-DW CURRENT LOOP SUPPLY( ISOLATED )
FEATURES
Powering a 4 ~ 20mA DC current loop.
Output voltage: DC 24V.
Isolation: Input to output to power
S4T-DWD CURRENT LOOP SUPPLY (TWO OUTPUT ISOLATED)
FEATURES
Powering a 4 ~ 20mA DC current loop.
Output voltage: DC 24V.
Two isolated output.
S4T-RR RTD ISOLATED TRANSMITTER
FEATURES
Converting a RTD (Pt100) input into a standard process signal.
Automatically eliminated for wire Resistance
(3 wires connection).
Isolation: Input to output to power
S4T-2RR TWO-WIRE RTD ISOLATED TRANSMITTER
FEATURES
Power supply for tow wire output :DC 11~32V
Converting a RTD (Pt100) input into a standard process signal.
Automatically eliminated for wire Resistance
(3 wires connection).
S4T-TC THERMOCOUPLE ISOLATED TRANSMITTER
FEATURES
Converting a T.C. input into a standard process signal. Cold junction compensated.
Isolation: Input to output to power.
S6-300 Multifunctional Power Meter
FEATURES
User-friendly
Cost effective
Direct access to the measured display
Measurement in 1P/3P3W/3P4W systems
T330 Power Meter
FEATURES
User-friendly
Cost-effective
Quick installation
Light and short depth
Quick setup parameters
Energy-saved protection mode
T250 Power Meter
FEATURES
User-friendly
Cost effective
Output modules on actual demand
Direct access to the measured display
Measurement in 1P/3P3W/3P4W systems