TAIK ELECTRIC

S2-500R/500RA 5 DIGITAL SPEED/RPM METER RELAY

FEATURES
5 digits LED display: 99999
Accuracy: ±0.05％ F.S.
Auto-change decimal point (99999 ~ 999.99)

S2-400P MICROPROCESS DIGITAL METER

FEATURES
4 digits LED display: 9999
Accuracy : ±0.05% to ±0.25%
Measuring adjustment in input sensing deviation

S2-412PA MICROPROCESS DIGITAL METER RELAY

FEATURES
4 1/2 digits LED display: ±1999
Accuracy : ±0.05% to ±0.25%
Auto-zero and hold function
Measuring adjustment in input sensing deviation

S2-300A 3 DIGITAL METER RELAY

FEATURES
3 digits LED display: ±999
Accuracy : ±0.1% to ±0.25%
Auto-zero and hold function

26.600 G

FEATURES
Nominal pressure: 0 ... 1 bar up to 0 ... 400 bar
Accuracy: 0.5 % FSO
Media: fuels and oils ,gases

S2-400A 4 DIGITAL METER RELAY

FEATURES
4 digits LED display: ±9999
Accuracy : ±0.05% to ±0.15%
Auto-zero and hold function

30.600 G

FEATURES
Nominal pressure: 0 ... 1,6 bar up to 0 ... 250 bar
Accuracy: 1 % FSO
Media: fuels and oils ,gases

SI4 Mini Plug-in Display

FEATURES
Display 4 digit red LED display
Accuracy: ±0.1% F.S.±1digit
IP enclosure IP 65

S3-DT FOUR OUTPUT DC SIGNAL TRANSMITTER

FEATURES
Steady voltage, current and low ripple output.
Three/Four isolated output.
Isolation: Input to output to power.

S4T-DT SIGNAL ISOLATED TRANSMITTER

FEATURES
Converting a DC input into a standard process signal.
Wide input and output range selection.
Isolation: Input to output to power.

S3-12(24)CM Multi-Circuit Power Meter

Features
Flexible monitoring the power energy in 8(4) three-phase or 24(12) single-phase circuits.
Compatible with various high precision TSC current sensors.
Power quality & power energy (kWh, kVAh, kVARh) measurements.
RS485 Modbus RTU communication interface.
Quick installation on a DIN 46277 35mm rail.

S4T-2DT　TWO-WIRE ISOLATED TRANSMITTER

FEATURES
Power supply for tow wire output :DC 11~32V
Converting a DC input into a standard process signal.
Isolation: Input to output

S4T-DS LOOP POWERED ISOLATOR

FEATURES
DC 4-20mA/DC 4-20mA, self powered.
Isolation: Input to output, between channels.

S4T-DTD SIGNAL ISOLATED TRANSMITTER (TWO OUTPUT)

FEATURES
Converting a DC input into a standard process signal.
Two isolated output.
4 way isolated.

S4T-DW CURRENT LOOP SUPPLY( ISOLATED )

FEATURES
Powering a 4 ~ 20mA DC current loop.
Output voltage: DC 24V.
Isolation: Input to output to power

S4T-DWD CURRENT LOOP SUPPLY (TWO OUTPUT ISOLATED)

FEATURES
Powering a 4 ~ 20mA DC current loop.
Output voltage: DC 24V.
Two isolated output.

S4T-RR RTD ISOLATED TRANSMITTER

FEATURES
Converting a RTD (Pt100) input into a standard process signal.
Automatically eliminated for wire Resistance
(3 wires connection).
Isolation: Input to output to power

S4T-2RR TWO-WIRE RTD ISOLATED TRANSMITTER

FEATURES
Power supply for tow wire output :DC 11~32V
Converting a RTD (Pt100) input into a standard process signal.
Automatically eliminated for wire Resistance
(3 wires connection).

S4T-RT SPEED (FREQUENCY) TRANSMITTER

FEATURES
Converting the output from a pulse-type transducer
into a standard process signal.
Isolation: Input to output to power.

S4T-TC THERMOCOUPLE ISOLATED TRANSMITTER

FEATURES
Converting a T.C. input into a standard process signal. Cold junction compensated.
Isolation: Input to output to power.